Valor Fires 842, Инструкция для установщика и владельца

Страница: 18 / 25

5. FITTING THE FASCIA
Important: Before fitting the fascia ensure that you have completed the
information on the last page of this guide.
Fitting the fascia.
1.
Remove the fascia from its
packaging.
2. There are three magnets on the
fascia (See figure 14). Ensure that
they are located correctly before
fitting the fascia.
3. Hold the fascia firmly and lift into
place
.
Keeping the magnets away
from the body of the heater, locate
the fascia hanging brackets into those
on top of the heater (See figure 14).
Lower the fascia into place and swing
the bottom of the fascia towards the
heater to engage the magnets.
6. OPERATING THE HEATER
Important Safety
Never cover the heater or obstruct the openings at the base of the heater, this
could cause overheating and consequent risk of fire.
What are the three switches for?
The heater is operated by three switches located on the lower left hand side.
Switch 1 = Main On - Off. (In the ‘ON’ position, only the flame
effect operates)
Switch 2 = 1kW fan heat setting and flame effect. (Switch 1 needs to
be in the ‘ON’ position to enable switch 2 to operate).
Switch 3 = 2kW fan heat setting and flame effect. (Switches 1 and 2
need to be in the ‘ON’ position to enable switch 3 to
operate).
Page 17
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2008.
Figure 14. Fitting the fascia