Valmar EASY 3 TTi, Руководство по обращению, эксплуатации и техническому обслуживанию

Страница: 58 / 78

58

place the beater on a solid surface and remove each of the 3 slidere from
the beater individually (push the slider downwards until it releases fron
the shaft);

after removal each slider must be very carefully inspected for wear and
deformations;

remove the shaft seal from the beater (in the case, the shaft seal is
cracked, worn or inelastic it has to be replaced by a new seal);



SLIDER
Ordering code - 10240020