3
1.
Certification and Safety
1.1.
Status of certification
Registration Number
: KCC-REM-BTI-ANY-001
1.2.
Safety instructions
- Because safety instructions are necessary to prevent accidents or dangers, please make sure to follow
them to ensure that you use this product safely.
1.2.1.
Installation
- Install the product in a stable place without danger of falling.
- Do not install the product in a place with high temperature or moisture. The product may not
operate properly under these conditions and there might be a danger of electric shocks.
- Do not use loose sockets or defective power cords, as there will be a danger of electric shocks and
fire.
- Plug the power cord into a socket and a multi-consent with an earth terminal.
1.2.2.
In use
- Do not carry out inspections or repairs except if you are a qualified persons.
- Do not disassemble arbitrarily or subject the machine to impact or dropping.
- Do not use around magnetic materials or store near them.
- Use the product in a place without electromagnetic interferences.
- Do not put things, which are heavy or have a risk of spillover, on the product.
- Do not use chemicals or detergents etc. for cleaning the product.
- Use only programs provided by or approved by Bitek.
- When printing, you may get burned due to high temperature. Except at the time you fill the rewinder
with the paper at the early stage of the printing, please DO NOT TOUCH the parts of rewinder.
Especially, please pay special attention as the temperature of shaft 2 and rewinder tension bar between
the printer and rewinder is very high.
