35
7.2.2.
How to change the sensor
- Use Black Mark Sensor for label that black mark is pre-printed.
- Use Gap Sensor for Pre-cut label.
- Black Mark Sensor and Gap Sensor are variable according to the purpose of use.
- A sensor alter switch is equipped with as shown in the picture below.
- You may use the Gap Sensor by putting up sensor alter switch.
- You may use the Black Mark Sensor by putting down sensor alter switch.
- Check if sensor is normally operated. (Please refer to 7.2.1)
7.2.3. Setup of the Printer Driver
- Before printing, be sure to check whether the sensor option of printer driver is set as
‘Adjustable’.
- When the vertical position (distance from the black mark) of printouts is not appropriate,
change the ‘Start’ value to make a fine adjustment.
Sensor alter switch
