9
3.1.4.
Delivery
-The installation personnel will completely install this product and software (such as the printer driver)
and also a test printa roll of continuous paper. At this time, the delivery will be completed by the
customer’s signature on the receipt.
3.2.
Installation of the press station
3.2.1.
Checking of press station components
- The press station is mounted or projected by a unwinder, rewinder, tension bar, sensor and cutter etc.,
and is a smart station that is intricatelyconnected with various semiconductor circuits and wires to
electronically control these all components, rather than being a simple rack to put a printer on.
Therefore, the same care is required as with the printer (digital press) when moving or installing it, so
please follow understand the installation personnel’s instructions and this manual.
3.2.2.
Checking of place, carrying and installation
-carefully carry the press station to the place of installation selected previously in section 3.1.2 before
the printer (digital press). This press station has a gross weight of 150Kg, with an overall size of (length)
71cm × (width) 193cm × (height) 70cm, which should be carried by at least 4 people. Because there
is an electronic circuit board at the rear of the press station, it is recommended that the rear is put as
close as possible to the wall for stable installation.
3.2.3.
Checking of Variousplug-insandoperations
