Vallox MyVallox Touch, Руководство пользователя

Страница: 21 / 24

21
© Vallox Oy - All rights reserved
Touch
MyVallox
TROUBLESHOOTING
NOTE
Error messages are displayed on the control panel and in
the MyVallox Home and MyVallox Cloud services.
FAULT CAUSE MEASURES
Error message:
Extract air fan
The extract air fan has stopped. Make sure that the fan is not running. The fan cabling and
operation must be checked and, where required, the fan
must be replaced. Contact the service centre.
Error message:
Supply air fan
The supply air fan has stopped. Make sure that the fan is not running. The fan cabling and
operation must be checked and, where required, the fan
must be replaced. Contact the service centre.
Error message:
Temperature sensor 1/2/3/4/5
The temperature sensor indicated
on the user interface has become
damaged.
The sensor installation must be checked and, where required,
the sensor must be replaced. Contact the service centre.
Error message:
High supply air temperature
The supply air temperature is too
high.
The operation of the post and additional heating resistor
must be checked. Contact the service centre.
Error message:
Low supply air temperature
The supply air temperature is too low. The operation of the post and additional heating resistor
must be checked. Ensure that the resistors are turned on in
the user interface. Contact the service centre if necessary.
The ventilation unit is not
working; the control panel is
not working.
Power input to the unit is lost or the
safety switch catch of the door is not
touching the safety switch.
Check:
• The fuse in the fuse box
• The glass tube fuse in the unit. Contact the service centre.
• Press the safety switch all the way down and test if the unit
can be turned on. If the unit can be turned on, ensure that
the safety switch catch is touching the safety switch.
The ventilation unit is working,
but the control panel is not
working.
Either the control panel 24 VDC
power is lost, or the control panel is
damaged.
Check the cables from the unit to the control panel. Contact
the service centre.
USING THE UNIT