Vallox MyVallox Touch, Руководство пользователя

Страница: 10 / 24

10
Touch
MyVallox
SETUP
Set the date
1. Use the Plus and Minus buttons to set the date.
2. Select OK .
3. Use the Plus and Minus buttons to set the month.
4. Select OK .
5. Use the Plus and Minus buttons to set the year.
6. Select OK .
7. The date is now set.
Basic fan settings
IMPORTANT
Adjust the air flows according to the values specified in
the ventilation plan. It is recommended that the air flows
be adjusted without having to choke the air flows at the
valves. This is the most energy-efficient set up.
First, set both values as close to the ideal value as
possible by looking at the supply and extract air fan
curves. If the ratio between the air flows is very high
at first, the ventilation unit may have to carry out extra
defrosting cycles in sub-zero temperatures, thus making
adjustment of the air flows more complicated. Check the
air flows by measuring them at the valves, and fine-tune
the percentage values as required.
NOTE
If the outside air is extremely cold (below -10°C on
an aluminium cell or below -3°C on a plastic cell), the
ventilation unit may have to defrost the heat recovery cell.
The air flows cannot be adjusted during defrosting.