Vallox 096 MC R, Эксплуатационные, технические и инструкции по обслуживанию

Страница: 6 / 12

6
Vallox
096
MC
© VALLOX • We reserve the right to make changes without prior notice.
What the units include can vary depending on the sales area.
MAINTENANCE INSTRUCTIONS
Condensing water
During the heating season, humidity of extract air condenses into
condensing water. Water formation may be abundant in new
buildings or if ventilation is low compared to the humidity build-
up caused by the residents. Condensing water needs to fl ow out
from the ventilation unit without hindrance. When carrying out
maintenance, for instance in autumn before the beginning of the
heating season, make sure that the condensing water outlet in
the bottom tank is not clogged. You can check it by pouring a
little water in the tank. Clean if needed. Do not let water fl ow into
electrical devices.
Extract air fan
Condensing water
Cleaning extract air fan (P)
Remove the extract air fi lter (C), upper support for the HR cell (E)
and the HR cell (D) from the unit as instructed earlier. Remove the
supply air fi lters G4 and F7.Open the four screws (F, fi gure 8) on
the protective cover of the extract air fan and remove the cover
downwards. The extract air fan can now be cleaned in place (fi gure
9). If you wish to detach the fan, lift it upwards and crank the plastic
lock to the right using for instance a chisel (fi gure 6).The fan falls
down and can be pulled out of the unit (fi gure 10). Disconnect the
quick coupling of the fan conductors.
9
10
8
F
P
55
545
600
Model R
Model L
121
143
143
121