52 Center Pivot 7000, 8000, 8120 Series
OPERATION
Towing Option
Towing the 2 Wheel E-Z Tow Pivot (Continued)
22. Connect the water supply line to the lower riser.
See Figure 52-1.
23. Prepare the drive units for operation. See Pre-
paring Drive Unit For Operation in the front of
Towing Option section.
24. Attach the ground wire to the ground lug on the
riser. See Figure 52-2.
25. With the disconnect in the OFF position, plug the
power and pump control plugs into the recep-
tacles. See Figure 52-3.
!
DANGER
• TO REDUCE THE POSSIBILITY OF SEVERE
INJURY OR DEATH BE SURE ALL SERVICE
AND CONTROL PANEL DISCONNECTS ARE
OFF BEFORE PLUGGING THE POWER PLUG
INTO THE RECEPTACLE.
26. If desired turn the power ON.
• Unlock the Service Disconnect and turn it “ON.”
• Unlock the Control Panel Disconnect and turn
it “ON.”
If power is available the control panel voltmeter
should display the voltage.
The machine is ready for operation.
!
CAUTION
• IF THIS IS THE FIRST ELECTRICAL CONNEC-
TION TO THE PIVOT POINT, BE CERTAIN THE
PHASING OR MOTOR ROTATION IS COR-
RECT. SHOULD ANY OF THE DRIVE UNITS
FAIL TO OPERATE OR NOT TRAVEL IN THE
DIRECTION SELECTED AT ANY OF THE
PIVOT POINTS, IMMEDIATELY PRESS THE
“STOP” BUTTON AND TURN THE CONTROL
PANEL DISCONNECT “OFF.” CALL YOUR
VALLEY DEALER.
1
Figure 52-1 1. Riser Pipe
1
2
Figure 52-2 1. Ground Wire
2. Ground Lug
2
1
Figure 52-3 1. Power and Pump Control Plugs
2. Receptacles
Содержание Center Pivot 7000 Series
