Valley-Dynamo Jet-Pong Coin JP100, Руководство пользователя

Страница: 22 / 80

19 | P a g e
Section 6
– Routine Maintenance
Note: This section can be performed by children aged 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge with
proper supervision and instruction.
Cleaning:
CAUTION: Please remove power by turning the ON/OFF switch at the rear to the OFF position
and unplug the power cord before cleaning.
Use Windex or similar cleaner to wipe down the entire table where needed. This includes the HMI (Human
Machine Interface) Touch screen, Video Display, Table Lid LED Plastic cover, Beverage Holders, Push-Button
Lights, Side Shields, Table Graphics, Coin/Bill Acceptor, Ticket Dispenser, the black Ball Return floor under the
Triangle Cup Assembly, etc.
Cup Inspection:
Inspect Red Solo cups for any hair line fractures, dents, etc. Replace cups where necessary.
Cup Finger Inspection:
Inspect Cup Fingers for damage or loss. Repair where needed. You can order more from Valley-Dynamo if
required. The purpose of these fingers is to reduce the amount of spinning when the ball enters the cup thus
speeding up the game.
Ball Inspection:
CAUTION: Please remove power by turning the ON/OFF switch at the rear to the OFF position
and unplug the power cord before lifting the Table Lid unless you absolutely must have power
on for viewing balls in
“Free Play” or “Auto Cycle”.
Properly insert the Prop Stick (*CE tables
only) when lifting the table Lid.
Using the key in the Accessories Bag, unlock and open the Table Lid. If any of the balls look damaged then place
the game into
“Free Play”
mode (refer to Section 7) and press buttons until the damaged ball(s) surfaces through
the Ball Exhaust Chute. You may also want to consider cleaning each ball before placing them back in the game.