VALLEY COMFORT SYSTEMS INC.
1290 COMMERCIAL WAY, PENTICTON, B.C. V2A 3H5 -- PHONE: (250) 493-7444
PAGE
6
ATTACHING A FAN CONTROL ON THE THERMOSTATIC WOOD HEATER
BAROMETRIC DAMPER & CHIMNEY
If your heater is being connected to a chimney with a consistently high draft install a barometric draft regulator set at .03
inches water column. Do not use a turn damper.
It is recommended that you connect the heater to a nominal 8" x 8" tile lined masonry chimney, which is in good repair,
and free from any leaks or obstructions. Alternately, a 6" diameter prefabricated chimney approved for solid fuel can be
used.
NOTE: Care should be taken to prevent the products of combustion, in the flue pipe, which may contain
carbon monoxide from entering the room where the heater is installed.
Particular care should be paid to the joints to ensure that there are no leaks from the flue pipe.
SPECIFICATIONS
MODEL VC95C
Overall Size
34 1/2" wide x 22 1/4" deep x 35" high
Size of Pipe Collar
6"
Size of Fuel Door
10" x 11"
Length of Wood Used
24"
Capacity
4 cubic feet
