background image

180-PE1006 v1.11

October 3, 2018

Page 18

PE1006

INSTALLATION INSTRUCTIONS

CONNECTION TO A MASONRY CHIMNEY

Masonry chimney***
Ensure that a masonry chimney meets the minimum standards 
(NFPA) by having it inspected by a professional.  Make sure there 
are no cracks, loose mortar or other signs of deterioration and 
blockage. Have the chimney cleaned before the stove is installed 
and operated.  When connecting the stove through a combustible 
wall to a masonry chimney, special methods are needed.

In Canada, the wall cut away is to provide 18” clearance for the 
connector.  The resulting space must remain empty.  A fl ush 
mounted sheet metal cover may be used on one side only.  If 
covers are to be used on both sides, each cover must be mounted 
on noncombustible spacers at least 1” clear of the wall.

***Blaze King recommends the use of a Stainless steel liner, 
preferably insulated, inside a masonry chimney. This to 
maintain proper draft and overall better operation of  the unit.

Your local dealer or local jurisdiction can provide details of 
approved methods of passing a chimney connector through a 
combustible wall in your area.  In USA, the National Fire 
Protection Association has minimum standards to comply 
with.  In Canada , this type of installation must conform to 
CAN/CSA-B365, Installation Code for Solid Fuel Burning 
Appliances and Equipment.

Содержание Blaze King PRINCESS PE1006





























































Отзывы: