rev. 3 – 26/05/2008
6/10
INSTRUCTIONS for vacuum packaging in bags
Plug into the socket paying attention not do damage the cable by squashing under the equipment
-
Push the main switch 0/1 (A).
-
Set the sealing time (about 3 seconds for embossed bags with a thickness of 90
micron) by turning the potentiometer B.
-
Position the bag, with relative product to be vacuum packed, as per fig. 2.
-
Lower the machine lid and keep it pushed down for a few seconds until the bag
completely wraps the product : the machine will automatically carry out the vacuum
packaging and relative sealing of the bag (during the vacuum pahse of 24 seconds,
the warning light VACUUM lightens).
-
The lid automatically lifts up at the end of cycle.
-
In case you want to interrupt the cycle without sealing, it is necessary to push the
main switch 0/1 (A).
-
In case you want to vacuum pack the product with a lower vacuum degree and seal
the bag, it is necessary to push the button STOP (C) and wait for a few seconds until
the cover lifts up.
Fig. 3
ON
OFF
STOP
Vacuum
A
C
B
Содержание CVE Series
Страница 2: ...rev 3 26 05 2008 2 10...
