VALERII S&M GROUP 0503KPAG1801, Оригинальное руководство по эксплуатации

Страница: 6 / 14

Проверил: Р.Ч./24.03.2015г

To switch on the tool, press the switch
lock (5) on the side first and then
squeeze the on/off lever (4) on the grip.

Due to the current limiter, the machine
starts with low speed, in order to protect
the mains supply against overload. The
max. speed will be reached after a few
seconds.

Release the on/off lever (4) to switch the
tool off.

ATTENTION: Disc will run out slowly!

Pull down the angle grinder only after the
disc has come to a complete stop.
Changing the carbon brushes
1. Open the carbon brush cover (7) with a
screwdriver and remove the carbon
brushes.
2. Always replace the carbon brushes in
pairs.
3. Fit the carbon brush cover (7) back on
and screw it down.
Maintenance and cleaning

The angle grinder does not require any
special maintenance.

Disconnect the machine from the power-
supply, before doing any cleaning jobs.

Keep the housing clean by using a dry
cloth or brush.

Do not use any cleaning agents, as they
might attack the material of the housing.

Let no liquids enter the inside of the
machine.
2 years warranty
The warranty period for this tool starts at the
date of purchase. Please provide your
purchase bill as proof.
This warranty includes:

repair of operational failures

replacement of faulty parts

qualified service and installation
provided that the failure does not result of
wrong handling.