Section 4 | Communications
© 2021
– Valeport Ltd
Page | 8
4.2 Ethernet Connectivity
The uvSVXe is fitted with a Transmission Control Protocol/Internet Protocol (TCP/IP) Ethernet
module set up in Dynamic Host Configuration Protocol (DHCP). This means the instrument will
automatically be assigned an IP address. Depending on how your router works, it should go back to
that IP address each time it is interfaced although this is not guaranteed unless you provide it with a
fixed IP in the router configuration.
4.2.1 Setting up Ethernet Connectivity
The uvSVXe has a Lantronix Ethernet module that will need to be configured. You can download
the Lantronix Device Installer software from
https://www.lantronix.com/products/deviceinstaller
Connect the uvSVXe to the network and run the software. If the device is not found after a few
moments press Search, top left
Once the module has been found click on XPort to reveal the IP address - in the example above:
192.168.8.155
Click on the IP Address in the left-hand panel to reveal more information in the right-hand panel
Select Web Configuration
Select the green arrow to reveal the password entry dialogue
Do not enter a Username or Password - simply select OK
