Valeport miniSERIES Series, Руководство по эксплуатации

Страница: 14 / 25

© 2019 Valeport Ltd
0660880d - miniCTD, miniSVP and miniTIDE
Page 14
4.8. Instrument Information
#032 Instrument responds with its software version number
#034 Instrument responds with its serial number
#138 Instrument responds with date of last calibration
4.9. Logger Control
$DIR Outputs file table (list of data files)
$CLR Clears memory (use with caution!)
$OCLK Reads Current Date & Time
$ICLK;DD;MM;CC;YY;HH;MM;SS Sets Date & Time
e.g.: $ICLK;03;02;20;08;14;30;00
sets clock to 14:30:00 on 3rd February 2008
$DEL;filename Deletes specific file e.g.: $DEL;File1
$EXTT;filename Performs simple text output data contained in specific file
$EXTZ;filename Performs Zmodem extraction of data contained in specific file
$RN;filename;newfilename Renames a file e.g.: $RN;File1;MyData
$FREE Outputs amount of free memory
$VOLT Reads internal and external voltage levels
4.10. Data Formats
Each time the instrument is turned on (or a new file started in Burst mode on the miniTIDE), it will output a file
header in the following format. Each logged file therefore contains this header information.
Now: 19/02/2008 14:55:00 The current date and time
Battery Level: 1.4V Internal battery level (guide only)
MiniTide: S/N 27838 Instrument Type and Serial Number
Site info: VALEPORT TEST SITE Site information
Calibrated: 14/01/2008 Date of last calibration
Latitude: 52.999286 Latitude for Pressure / Depth conversion
Mode: B1 Current operating mode
Tare: 0 Current Pressure Tare value
Pressure units: dBar Current Pressure Units (dBar, metres or feet)
Logged and real time data follow the same formats, described below.
miniSVP example 10.351 21.488 1506.739
miniCTD example 10.128 19.786 46.554
miniTIDE example 0012.345