Valeo THERMO DC 200, Инструкция по установке и эксплуатации

Страница: 27 / 40

23
Thermo DC 200 Technical data
12 Technical data
Unless limit values are given, the technical data below is understood to
be subject to the usual tolerances for heating appliances of +/-10% at an
ambient temperature of +20°C and at nominal voltage. NOTE:
The allocation of the circulation pumps to the heating appliances must
be carried out according to the upstream resistances and the minimum
flow rate.
Heater Thermo DC200
Ident. no. 11117083_ 11122596_
11139411_
Kind of Design full electrical heater
Ambient temperature during operation °C -40 … +85
Storage temperature °C -40 … +90
Operating overpressure bar max. 2.0
Capacity of the heat exchanger I 9.4
Minimum water flow l/h
>
1500
Minimum capacity of the water system I 25
Antifreeze ratio in the cooling system % 30 up to 60
Maximum operating altitude m 2000
Device dimensions
(tolerance ± 3 mm) mm length: 578
wide: 247
height: approx. 225
Weight kg 15
Continued on next page