Valeo Guideo, Руководство пользователя

Страница: 23 / 59

Remote Control
3. Installation and vehicle type
Install
Angle adjustment mode:
Angle adjustment mode helps you install guideo™ in its exact position.
Adjust guideo™ until the LED display shows “00:00.” The bigger the number, the
more guideo™ is out of position.
The first two digits indicate Y-axis acceleration values and last two digits indicate
Z-axis acceleration values. (Z-axis digits should be "00".)
Turn signal test mode helps you check the turn signals.
If turn signals are correctly connected, LED displays are as follows:
“[ : ]” is displayed when no turn signal is activated.
“[-: ]” is displayed when left turn signal is activated.
“[ :-]” is displayed when right turn signal is activated.
If the display shows either “[-:-]” or a different massage from the above operations, the
turn signal wiring is incorrect.