Valentin Compa II Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 110

background image

Compa II series

Important notes

07.15 Operating

manual

5

1 Important

notes

The label printer can be used in thermal as well as in thermal transfer
applications.

The label printer is equipped with 8 vector, 6 bitmap and 6
proportional fonts. It can be printed inverse, in italic format or 90
degrees turned fonts.

The handling of our durable label printer is easy and comfortable. The
printer settings are made with the keys of the foil keyboard. At each
time the graphic display shows the current status.

By the use of a 32 Bit processor and a large main memory of 16MB
also for large labels (6000 mm) a fast print is possible.
An enormously high print quality is obtained by most modern
printhead technology.

By a new-developed electronics a maximum print speed of up to 200
mm/s can be achieved.

As default, printers of this series are equipped with a parallel, serial,
USB and Ethernet interface. Additionaly, the label printer is equipped
with an USB Host that permits the connection of an external USB
keyboard and/or an USB memory stick. The label printer automatically
recognizes by which interface it is controlled.

Time-saving printer update is possible by interface.

Thanks to the large number of options the label printer can be
adapted to each task.

1.1 Intended

use

The label printer is a state-of-the-art device which complies with the
recognized safety-related rules and regulations. Despite this, a danger
to life and limb of the user or third parties could arise and the label
printer or other property could be damaged while operating the device.

The label printer may only be used while in proper working order and
for the intended purpose. Users must be safe, aware of potential
dangers and must comply with the operating instructions. Faults, in
particular those which affect safety, must be remedied immediately.

The label printer is solely intended to print suitable media which have
been approved by the manufacturer. Any other or additional use is not
intended. The manufacturer/supplier is not liable for damage resulting
from misuse. Any misuse is at your own risk.

Intended used includes heeding the operating manual, including the
maintenance recommendations/regulations specified by the
manufacturer.

«
...
3
4
5
6
7
...
»

Содержание Compa II Series















































































































Отзывы:

Нет отзывов

Похожие инструкции для Compa II Series

Бренд: DataCard Страницы: 2

Бренд: LabelTac Страницы: 2

Бренд: Xerox Страницы: 414

Бренд: Oki Страницы: 268

Бренд: Oki Страницы: 54

Бренд: Oki Страницы: 54

Бренд: Oki Страницы: 202

Бренд: Oki Страницы: 201

Бренд: Oki Страницы: 103

Бренд: Oki Страницы: 256

Бренд: Oki Страницы: 2

Бренд: Oki Страницы: 36

Бренд: Oki Страницы: 63

Бренд: Oki Страницы: 28

Бренд: Oki Страницы: 616

Бренд: Oki Страницы: 32

Бренд: Oki Страницы: 138

Microline 320 Turbo D1

Бренд: Oki Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды