Valen BACA 24V25A, Руководство по эксплуатации

Страница: 4 / 11

24V BACA
OPERATION MANUAL
AUS 1300 734 253 NZ 0800 734 253
4
THANK YOU
FOR INVESTING
IN A 24V BACA
BATTERY TESTER
With this processor controlled capacity tester, you can test the
Ah capacity of Valve Regulated Lead Acid (VRLA) batteries.
You can set the cut-off voltage (the voltage limit where you
want to stop the discharge), the discharging current and the
charging time between the cycles is programmable within the
tester. You can program 1 to 200 cycles.
The tester measures the charged and discharged Ah and the
elapsed time since the start of each cycle.
– Performs a full battery discharge test producing an
accurate and absolute report on the performance of the
battery and/or charger under test.
– Easy to use software allows for data and tests from the
BACA to be stored, exported to PDF or printed for the
analysis of batteries.
–
The BACA 12V and 24V unit can complete up to 200
cycles unassisted and record the battery and charger
performance data. Enabling the user to set up the system
and leave it to run the tests ultimately saving time on
battery testing.
– Flexible unit allows for testing of an extensive range of
battery capacities from 0.8Ah to 200Ah.
INTRODUCTION
CONTENTS
CONNECTING THE TESTER TO
THE
BATTERY 5
Menu System 5
Setting the Test Parameters 5
Reading the Test Results 7
STARTING THE TEST 7
Start with Discharging 7
Start with Charging 7
During the Test 7
Pendrive Suspend 8
ERROR MESSAGES 8
TECHNICAL SPECIFICATIONS 8
SOFTWARE 9
Main Icons 9
Measurement Window 9
SOFTWARE 10
Moving the Marker 10
Deleting the Marker 10
TEST WINDOW 10
GRAPH SETTINGS 11