28
FP16
– Saint-Laurent - Installation and Operation Manual
1.3.14.2
Masonry Trim
Note that if you install a masonry trim and that the non combustible finishing
material is more than 3/8’’
thick, you will need to install it before installing your fireplace.
Figure 32 : Masonery Trim Installation
1.
Once the fireplace is fully installed, press the masonry trim
(A)
against the fireplace (the longest side
towards the bottom going inside the fireplace).
2.
Secure the masonry trim
(A)
to the fireplace with 4 screws
(B)
supplied with the faceplate. Always
make sure the masonry trim is squared to the fireplace.
3.
Make sure that the doors still slide perfectly.
4.
Once the trim is installed, you may proceed with the installation of the non combustible wall (all types
of cement board).
5.
Install the non combustible material on top of the cement board and against the exceeding side of the
masonry trim
(A)
.
