Quadra-Fire LOGS-QFI30, Инструкции по размещению бревен

Страница: 1 / 3

1
Quadra-Fire • LOGS-QFI30 Log Instructions • 2227-935 Rev. B • 7/11
Log Set Assembly: LOGS-QFI30
Models: QFI30, QFI30-C
LOG PLACEMENT INSTRUCTIONS
CAUTION: Logs are fragile, handle with care. Install back refractory by placing it against the back of the fi rebox. See Figure
3. The back refractory must be held in the upright position until the side refractory is installed. Install the left side refractory
as shown in Figure 4. Bend the refractory tab down as shown in Figure 5. Repeat this step for the right refractory panel.
Figure 2. Refractory and Logs Installed Figure 3. Install Back Refractory
Figure 4. Install Side Refractory
Figure 5. Bend Refractory Tab
SRV2227-702 SRV2227-702
SRV2227-703 SRV2227-703
SRV2227-705 SRV2227-705
SRV2227-704 SRV2227-704
SRV2227-706 SRV2227-706
SRV2227-701 SRV2227-701
Figure 1. Reference Points for Log Placement
LEFT GRATE LEFT GRATE
TINE
TINE
RIGHT GRATE TINE RIGHT GRATE TINE
PILOT PILOT
ASSEMBLY
ASSEMBLY
LOG PIN LOG PIN
LOG SUPPORT LOG SUPPORT