34
Figure 32
Figure 33
2.7
DOOR OVERLAY INSTALLATION
Figure 34
In order to install the door overlay,
simply put the overlay on the door
frame. Then, pass the 6 bolts through
the holes shown in figure 34.
Finally, secure the door overlay in
place using the 6 nuts. You will need
to lift the gasket slightly. It is
important that the gasket stays intact.
2.8
DOOR ALIGNMENT
To adjust the door positioning and spacing, loosen the hinge screw and pivot the hinge until
the door is in the correct position. To tilt the door, lock in place one of the two hinge and
pivot the other. The door will tilt to one side or the other depending on the direction the hinge
is pivoted. For the door to be straight, both hinges must be aligned along the same axis.
Содержание FP10 Lafayette
