37
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
P. 540-563-2000
F. 540-362-9800
www.valcom.com
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
P. 540-563-2000
F. 540-362-9800
www.valcom.com
Setting 12 - Daylight Saving Time
Press the bottom button to switch between “d’ or “E”
“d” disables Daylight Saving Time
“E” enables Daylight Saving Time
Setting 13 - 12/24 Hour Mode
Press the bottom button to switch between 12 and 24.
12 causes the master clock to display time in 12 Hour mode.
24 causes the master clock to display time in 24 Hour mode.
Setting 20 - Programming Clock Circuit #1
(Output)
Press the bottom button to scroll from 1 to 9. These numbers correspond to
different protocols, specifically:
Manual Controls
12-- E
13--12
20-- 7
The numbers shown on the left are examples. Going down the list and entering every one of
the examples exactly as shown will cause the master clock to malfunction or use incorrect data.
Program your clock setting based off of the instructions in the description on the right.
Setting 3 - Set Day of the Month
Use the bottom button to scroll from 01 through 31. This permits the user to
select a day from the 1st of the month to the 31st of the month.
Setting 10 - Technical Mode
If the bottom button is used to scroll to option 08. Once Option 8 is selected,
settings 11, 12, and 13 will become accessible.
Setting 11 - RS485 Data Rate
Use the bottom button to scroll from 01 through 12. Each digit corresponds to
a data rate:
1 - Every second
2 - Every 5 seconds
3 - Every 10 seconds
4 - Every 15 seconds
5 - Every 30 seconds
6 - Every minute
7 - Every 2 minutes
8 - Every 5 minutes
9 - Every 10 minutes
10 - Every 15 minutes
11 - Every 30 minutes
12 - Every hour
3--28
10--08
11--03
