automatically lock in that position
To incline: Place your hand in the centre of
the seat at the rear.
Pull the incline strap (p) while gently pushing
the seat upward to the desired position.
10>BRAKE
To engage the brake press down on the
central red brake pedal (q), until the brakes
engage fully into the wheel cogs.
To disengage, simply reverse the process.
11>EXPANDA HOOD
The Expanda hood unzips, increasing the
size of your standard hood to give greater
coverage and protection from the sun and
weather for your child.
To open the Expanda Hood: Locate the zip
in the center of the Expanda Hood and unzip
completely (r). Gently pull the Expanda Hood
forward until it is reaches its full extension.
To close the Expanda Hood: Gently push the
Expanda Hood back, allowing the middle
section to fold in on itself. Carefully zip the
Expanda Hood closed.
The hood offers two height positions to
allow for your child’s growth (s). To increase
the height of the hood simply move the hood
to the second fixture.
IMPORTANT HOOD INSTALLATION
INSTRUCTION
Secure the rear hood skirt to the frame by
passing the press stud through the slot
provided and firmly engaging the other half
by pressing strongly. Always test that the
press studs are fully and firmly engaged.
12>HARNESS
To secure your child in the harness:
Overlap buckles and so that they fit together
to form one complete buckle (a).
Insert the completed buckle into the Buckle
Housing (b) until it engages securely in
place(c).
To open your harness:
Push down on both Buckle Prongs (d).
Simultaneously press the release button in
the centre of the buckle (e).
Lift the buckles from the Buckle Housing (f).
IMPORTANT WARNING:
AVOID SERIOUS INjURY FROM FALLING
OR SLIDING OUT. ALWAYS USE SEAT BELT
13>FOLDING
To ensure maximum compactness, prior to
folding your stroller:
•
fold the hood closed back against the
handle
•
incline the seat
•
lower the bumper bar
•
remove all contents from the basket
Locate the frame release (y) on either side
of the handle. Lift the frame release buttons
on either side of the handle simultaneously
upwards.
Swing the handle forward. As the handle
passes the fold joint (z), you will feel the
lower chassis release and fold downward in
a ‘z’ shape.
Push the frame down completely until the
frame lock engages.
