OPENING THE STROLLER
FIGURE A
1. To open the stroller, first release the catch on the left
hand side (1a) which holds the stroller in the umbrella
position. Holding the stroller by the handles, gently lift
and push down on the primary locking bar (1b) until
fully open. CAUTION: Ensure that all the locking
devices are engaged before use.
FITTING THE HOOD
FIGURE B
2. To fit the hood, slide the clips (2) on either side onto
the bracket of the frame and ensure they click firmly
into place.
3. Secure into position using the Velcro strips (3) on
each side of the hood.
4. Complete the fitting by securing the Velcro strips on
the back flap of the canopy (4).
USING THE BRAKE
FIGURE C
5. Push down on the brake lever on the right hand side
(5) to engage the brake. It is recommended that you
test the brake before use.
6. Push down on the brake lever on the left hand side
(6) to release the brake. CAUTION: Never leave your
child unattended in the stroller even if the brakes
have been applied. The brakes may not work properly
on a steep incline.
USING THE SAFETY HARNESS
FIGURE D
7. A five-point harness is provided to secure your child.
Sliding adjusters are fitted and should be carefully
adjusted on each side (7a), at the base strap (7b)
and on both shoulder straps (7c) so that the harness
fits your child comfortably.
8. To fasten the harness push the two clips into the
buckle until they click into position (8).
9. To unfasten the harness push the clips in on either
side (9) and remove the two clips from the buckle.
10. To fit the harness covers, wrap each one around the
shoulder harness straps and secure using the
Velcro strips (10).
11. There are three slots provided on the backrest to
adjust the height of the shoulder straps (11).
CAUTION: Always use the safety harness.
A
B
C
D
1a
1b
2
3
4
5
6
7a
7b
7c
8
9
10
11
