background image

FIGURE E 

12. The length of the shoulder straps can be adjusted at 

the back of the seat. Press down on one red plastic 

tab (12a) and firmly pull backwards to lengthen whilst 

holding the strap (12b). To shorten hold the edge of  

the strap (12c) and pull inwards whilst pressing on  

the plastic tab. Repeat for the other side.

ADJUSTING THE BACKREST

13. The backrest can be adjusted to different positions. 

Whilst pressing down on the lever located on the  

back of the seat with one hand (13a), pull the strap 

with the other hand (13b) to raise the backrest to  

the desired position. 

14. To lower, firmly push down on the lever until the 

backrest is lowered to the desired position. Ensure  

that the lever is pushed inward after adjusting. 

FITTING THE QUICK RELEASE WHEELS

FIGURE F

15. To fit the front wheel, simply insert the wheel axle into 

the housing until fully engaged. To remove, press the 

button above the housing (15) and take the wheel out.

16. To lock the front wheel, when you do not require it to 

swivel 360º, ensure the wheel is straight and press  

the button upwards (16) until it clicks firmly into 

position. To release press the button downwards.

17. To fit the rear wheel, simply insert the wheel axle 

 

into the housing until fully engaged. To remove,  

press the button beside the brake lever (17) and  

take the wheel out.

FOLDING YOUR STROLLER

FIGURE G

18. Before folding, ensure the backrest is in its most 

upright position and the hood is fully folded back. 

19. To fold the stroller, first press the secondary locking 

button (19a) and pull upwards whilst pushing down  

on the right hand side lock (19b).

 20. Continue to lift the secondary locking button (19a)  

and gently push the handles forward (20a) until the 

stroller is completely folded. Use the catch to lock the 

stroller in the umbrella position (20b).

FITTING THE BASKET

FIGURE H

21. To fit the basket, wrap the basket straps 

 

around the frame tubes where shown (21a, 21b) and 

secure using the press studs. Repeat for the other side.

E

F

G

H

12a

12b

12c

13a

13b

15

16

20a

20b

21a

17

21b

19a

19b

Содержание prism

Страница 1: ...e features or procedures outlined here have changed since this document was written If you are unsure of any procedure shown here please contact us via the web at info valco com au to obtain the most up to date information before use Include the batch number which can be found on a sticker the stroller frame All pictures and diagrams herein are provided for illustration purposes only Actual produc...

Страница 2: ...e use 6 Push down on the brake lever on the left hand side 6 to release the brake CAUTION Never leave your child unattended in the stroller even if the brakes have been applied The brakes may not work properly on a steep incline USING THE SAFETY HARNESS FIGURE D 7 A five point harness is provided to secure your child Sliding adjusters are fitted and should be carefully adjusted on each side 7a at ...

Страница 3: ... take the wheel out 16 To lock the front wheel when you do not require it to swivel 360º ensure the wheel is straight and press the button upwards 16 until it clicks firmly into position To release press the button downwards 17 To fit the rear wheel simply insert the wheel axle into the housing until fully engaged To remove press the button beside the brake lever 17 and take the wheel out FOLDING ...

Страница 4: ...Do not carry additional children in the stroller It may be unsafe to use any accessories other than VALCO approved ones NEVER allow the stroller to be used as a toy NEVER allow your child to stand up in the stroller Although the chassis is strong it will be weakened when descending steps curbs with the back wheels only ALWAYS be aware of the risks provided by fire and other significant sources of ...

Отзывы: