VALBERG UF 242 E W742C, Инструкция по эксплуатации

Страница: 13 / 58

6 FR
Utilisation de l’appareil
B
6 EN
Using the appliance
B B
Using the appliance
Reversed door
Tools required:
• Phillips screwdriver,
• flat screwdriver,
• hexagon key
• Make sure that the appliance is unplugged and empty.
• To remove the door, you need to tilt the appliance backwards. You need to position the
appliance on something solid so that it does not slip whilst you are positioning the door the
other way round.
• All the parts that have been removed must be kept in a safe place so that the door can be replaced.
• Do not lie the appliance flat as this could damage the cooling circuit.
Unscrew the hinge cover.
• It is better for 2 people to handle the appliance during assembly.

Open the door and unscrew the upper hinge. Then remove the door from the unit and place

it on some soft padding to prevent damage.
Remove the cover and the screws on the left-hand side and then attach them on the right.
 Carefully position the back of the unit flat on some soft padding. Start by removing the 2
levelling feet. Then unscrew the door hinge and the adjustable foot on the left.
Caution ! If there is a screw in the front left-hand corner, remove it before installing the hinge.
Unscrew and remove the pin from the lower hinge. Turn the support over and reposition.
Install the hinge on the left-hand side and the adjustable foot on the right. Then screw the
2 levelling feet onto their initial parts
Unscrew the pin in the upper hinge and insert it into the hole on the left.
Return the appliance to its vertical position and place the door on the lower hinge. Make sure
that the centre of the lower hinge is inserted in the hole in the door.
Then attach the upper hinge to the door. Before fixing the upper hinge firmly in place, try to open
the door to check that the unit is properly sealed. Then screw the hinge cover onto the hinge.



