VALBERG FIH 60 EGK 756C, Инструкция по эксплуатации

Страница: 18 / 64

11 EN
Using the appliance
B
Installation without external opening
Recycling version
Contact your supplier to obtain active carbon
filters to transform the extractor hood into a
recycling hood.
Installing the active carbon filter (cassette)
• Check that the diameter of the active
carbon filter corresponds to the outlet
diameter.
• If necessary, remove the pre-installed
diameter adapter.
• Position the active carbon filter on the
outlet and attach it in place by turning it
anticlockwise.
Installing the active carbon filter (cut-out)
• The metal filter has to be removed before
the active carbon filter is installed.
• To open the metal filter, press on
the locking device and pull the filter
downwards.
• Place the pre-cut filter on top of the
metal filter. Hold it in position using the
• metal rods (supplied depending on the
model).
• Replace the metal filter in its original
position.
PLEASE NOTE
Make sure that the filter is properly attached; otherwise,
it could become dislodged and cause a hazard.
Installing a carbon filter reduces the extraction power of
the hood.