VALBERG CNF 270 F W625C2, Инструкция по эксплуатации

Страница: 6 / 40

8 9
B B
8 9
When using the appliance When using the appliance
B B
• Place the lower hinge on the left side and screw it in properly.
• Place the fixing plate on the right side and screw it down. Replace the adjustable feet by
screwing them on.
Bottom
hinge
Mounting plate
on the front foot
• Install the lower door, making sure that it does not fall.
• Position the central hinge opposite its previous position and adjust it.
• Screw the central hinge correctly.
• Install the upper door, making sure that it does not fall.
• Place the top hinge and the top hinge pin in the top door hole, and adjust the position of
the top door.
• Secure the upper hinge correctly with the screws.
• Replace the upper hinge cover
Top hinge
Temperature indicator
• To help you adjust your appliance correctly, it is equipped with a temperature indicator
located in the coldest area.
• In order to properly preserve the food in the refrigerator, particularly in the coldest part,
make sure that the temperature indicator shows the word "OK".
• The symbol opposite indicates the location of the coldest part of the refrigerator. It defines
the top of this area.
• If “OK” does not appear, the average temperature of this zone is too high. Set the temperature
regulation to a colder setting.
• Whenever the thermostat setting is changed, wait until the temperature inside the appliance
has stabilised before carrying out a new adjustment, if necessary. Change the thermostat
position gradually only and wait at least 12 hours before checking again.
NOTE : After loading fresh food into the appliance or
after opening the door repeatedly or for a long time, it
is normal that the word “OK” does not appear on the
temperature indicator. Wait at least 12 hours before
resetting the temperature control.
EN EN