VALBERG 6S47 D SAD929C, Инструкция по эксплуатации, Страница: 24 / 141

23 EN
Program
Description of
cycle
Detergent
pre/main
wash
Running
time(min)
Energy
(kWh)
Water
(L)
Rinse
aid
Glass
Wash (45°C)
Rinse
Rinse (50°C)
Drying
14g
1 tab
70 0.400 5.8
90 min
Wash (65°C)
Rinse
Rinse
Rinse (60°C)
Drying
14g
1 tab
90 0.590 6.6
Rapid
Wash(40°C)
Rinse
Rinse
12g
1 tab
30 0.244 5.8
NOTE:
The ECO program is suitable to clean normally soiled tableware, that for this
use, it is the most efficient program in terms of its combined energy and water
consumption, and it is used to assess compliance with the EU ecodesign legislation.
Saving energy
1. Pre-rinsing of tableware items leads to increased water and energy consumption and is
not recommended.
2. Washing tableware in a household dishwasher usually consumes less energy and water in
the use phase than hand dishwashing when the household dishwasher is used according
to the instructions.
Starting a programme
1. Draw out the basket, load the dishes and push them back.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”. Make
sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5. Choose a program, the response light will turn on. Then press the Start/Pause button,
the dishwasher will start its cycle.
Changing the program mid-cycle
• A programme can only be changed if it has been running only for a short period of time,
otherwise the detergent may have already been released or the the wash water with
detergent has already been drained. If this is the case, the dishwasher needs to be reset
and the detergent dispenser must be refilled.
To reset the dishwasher, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
Product usage
B