Cleaning a flame monitor
Checking a burner cone ・Whirl vane ・Stabilizer
Take out a burner and check whether or not burner cone and whirl vane are dirt or not.
In case the burner cone and/or whirl vane is dirty, clean it(them) with cloth or brush.
Figure12
Figure11
the burner cover using the provided screws.
①
②
Unscrew five screws of burner cover and take
the burner coveroff. Pull out the flamemonitor and
check whether or not its lens is dirty/foul
If the lens is dirty/foul, clean the surface of the
lens with a soft coton swab or cloth untill
it is clear.
③
Replace the flame monitor. Then securely replace
Stabilizer
Burner cone
Whirl vane
Flame monitor
check whether or not its lens is dirty/foul
If the lens is dirty/foul, clean the surface of the
lens with a soft coton swab or cloth untill
it is clear.
③
Replace the flame monitor. Then securely replace
the burner cover using the provided screws.
①
②
Unscrew five screws of burner cover and take
the burner coveroff. Pull out the flamemonitor and
21
