Vaisala HUMICAP HM70, Быстрое руководство

Страница: 12 / 40

3 Taking measurements
3.1 MI70 first start-up settings
When taking MI70 into use for the
fir
st time, con
figur
e the basic settings (language, date, and
time) as instructed below.
1. Press the Power On/Off button in MI70 to switch the indicator on.
2. Press any of the arrow buttons and open the menu by pressing Open .
3. Select Settings using the buttons and press .
4. Select User interface and press .
5. Select Language and press Set .
6. Select the language using the buttons. Con firm the selection by pressing Select .
7. To set the date, return to the
Settings
menu by pressing .
8. Select
Date
and press
Set
. Change the date using the buttons. To con
firm
the
selection, press Select .
To select an alternative date format, select Date format and press Set . You can select from
3 alternative formats. Press
Select
to con
firm
the selection.
9. To set the time, return to the Settings menu by pressing
10. Select Time and press Set . Change the time by using the arrow buttons. Con firm the
selection by pressing OK . As a default, the time format is based on the 24-hour clock.
If you want to use the 12-hour clock, select 12-hour clock and press On .
11. To return to the basic display, press Exit .
3.2 Basic measuring steps with HM70
If taking measurements in a pressurized environment, make sure that the air
pressure setting of HM70 is correct. See Setting actual pressure value and unit
(page 13) .
After con figuring the MI70 basic settings as instructed in MI70 fir st start-up settings (page 12) ,
you can proceed to take measurements with HM70.
1. Remove the yellow transport protection cap from the probe head.
2. With the MI70 indicator power switched off , connect the HMP75/HMP76/HMP77 probe
cable to either of the connector ports of MI70.
Rotate the metal ring around the cable connector clockwise until it tightens up.
3. Switch MI70 on by pressing the Power On/Off button.
M212070EN-B
12