Vaisala HUMICAP HM70, Быстрое руководство

Страница: 11 / 40

The status of the MI70 battery is shown by the battery icon in the upper left corner of the
display. Possible statuses are listed in Table 3 (page 10) .
To recharge the rechargeable battery:
1. Plug in the charger connector to the MI70 indicator. The socket is located at the top of the
indicator, covered by a rubber seal.
2. Connect the charger to a wall socket. An animated battery icon in the left corner of the
display indicates that the battery is charging. The recharge duration (typically 4 ... 5 h)
depends on the charge level of the battery.
A new battery takes approximately 3 charging cycles to reach its maximum
capacity.
Do not store the batteries empty. Empty batteries may not charge after an
extended storage period.
To keep the rechargeable MI70 battery in good working condition, recharge
MI70 monthly if the indicator is not in use.
Chapter – MI70 indicator
11
ENGLISH