4. Installing device
Installation of 1 device requires 1 - 2 sealant packs (1 pack has 450 ml).
5 min
SEAL
ANT
SEAL
ANT
1.
Clean the device holder
of possible sealant residue
from previous installations.
Place the device in the
holder and remove the
foam cap.
2.
Prepare the sealant.
Apply a little bit of sealant
to the hole to make sure
that the sealant runs
smoothly and is well mixed.
Note that in temperatures
above +5 °C (+41 °F) the
sealant dries in 5 minutes.
3.
Apply sealant to the top
of the SIM card cover, filling
the black slot.
Leave the clear part visible.
SEAL
ANT
5 min
4.
Apply the rest of the
sealant to the hole.
5.
Insert the foam cap and
seal with the tape.
6.
Place the device in the
hole, foam cap down. The
device holder must touch
the road surface. Let the
excess sealant flow over.
If the sealant does not flow
over, remove the device
and add more sealant to
the hole.
Press the device down
firmly for 5 minutes until
the sealant is dry.
7