2. Activating device
Go to the installation location to perform the device activation.
1.
Open the mobile
application and select
Connect to device
.
Hold the phone close to the
NFC symbol and wait until
the device is shown on the
application.
2.
Select
Start activation
.
Follow the onscreen
instructions.
3.
Complete the activation.
The device is sending
measurements to the
cloud.
When the device has been
active for 60 minutes, it is
no longer possible to
access the device with a
phone.
3. Drilling hole for device
• Depth 360 mm (14.2 in)
• Diameter 60 mm (2.4 in)
1.
Use water when drilling
asphalt or concrete.
Remove the asphalt block
from the drill bit.
2.
Do not use water when
drilling gravel.
Drill approx. 50 ... 100 mm
(2 ... 4 in) at a time. Clean
the drill bit in between to
avoid gravel from sticking
inside.
3.
Verify the correct depth
with the dummy block. If
the hole is too deep, add
filler sand.
If there is water in the hole,
use a cloth to dry it.
6
M212671EN-C