Chapter 5 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 35
List of Serial Commands
All commands can be issued either in uppercase or lowercase. In the
command examples, the keyboard input by the user is in
bold
type.
The notation <cr> refers to pressing the carriage return (
Enter
) key
on your computer keyboard. Enter a <cr> to clear the command
buffer before starting to enter commands.
Table 5
List of Serial Commands
Command Description
? Show
device
information
??
Show device information (overrides poll mode)
ADDR [0 … 255]
Show or set transmitter address
CLOSE
Close the temporary connection and return the
device to POLL mode
ERRS
Display the currently active errors
FORM [modifier string]
Set output format
FRESTORE
Restore factory settings
HELP
Show list of currently available serial commands
INTV [0 ... 255 S/MIN/H] Set the continuous output interval (for RUN mode
and R command)
OPEN [0 … 255]
Open a line to transmitter at defined address
R
Start the continuous outputting
RESET
Reset the transmitter
S
Stop the continuous outputting
SDELAY [0 … 255]
Set response sending delay
SEND [0 … 255]
Output readings once (specify address for
transmitters in POLL mode)
SERI [baud p d s]
Show or set the serial interface settings
SMODE [mode]
Show or set startup serial mode:
RUN, STOP, or POLL
SNUM
Display transmitter serial number
TIME
Show transmitter uptime
UNIT [m/n]
Select metric or non-metric units
VERS
Show transmitter firmware version
PNORMT [-100 ... 100] Show or set the temperature for pressure
normalization
MIXRATIO [0 ... 100]
Show or set ratio (%) of SF
6
in the measured
environment
N2MOLW [weight]
Show or set molecular weight of other gas