Vaillant VRT 392, Руководство по эксплуатации и установке

Страница: 17 / 32

4.7.4 Hot water settings
If the hot water provision for your home is done by the
boiler the target value can be entered using
the VRT 392.
⇒
Turn the left-hand dial until the screen 10 "Hot
water parameters" is reached.
The cursor appears in front of the value for the target
temperature.
⇒
Click the right-hand dial.
The field is highlighted.
⇒
Turn the right-hand dial until the desired value is
displayed (values from 35 °C to 70 °1 C in half
degree steps are possible).
⇒
Click the right-hand dial.
The desired target temperature is set. The value is
saved and no longer highlighted.
H
Attention!
Risk of being scalded by hot water!
At the draw-off points of the hot water there is
a danger of scalding at temperatures in excess
of 60 °C. Small children and elderly people can
be at danger even at lower temperatures.
Select the target temperature so that nobody is
at danger.
4.7.5 Changing the name of the system components
On the screen 14 you can see which names of
components you can change.
> Select
Change
names
14
HC1
DHW :
:
:
HC1
Bathroom 1
Fig. 4.16 Screen 14 (example)
You can enter a new name to the right of the colon
(numbers 0-9, spaces, capital/small letters). This is how
to do it:
⇒
Turn the left-hand dial until the screen 14 "Change
names" is reached.
⇒
Turn the right-hand dial until the cursor is in front
of the component name that you want to change.
⇒
Click the right-hand dial.
The input field of the first character is highlighted.
⇒
Turn the right-hand dial until the desired character
is displayed.
⇒
Click the right-hand dial.
The desired character is accepted. The character is
saved and no longer highlighted.
⇒
Turn the left-hand dial by one notch in the clockwise
direction.
The next character is marked by the cursor.
⇒
Click the right-hand dial.
The field is highlighted.
⇒
Turn the right-hand dial until the desired character
is displayed.
⇒
Proceed in the same way for the remaining
characters of the name.
h
Note!
Entire names or extra characters can be deleted
by entering spaces.
Operation 4
17 Operating Manual VRT 392