11
Split Murales User Manual
EN
• Select the dehumidifying mode (DRY).
• Press the TEMP buttons to select the temperature
setting.
When pressing the TEMP buttons, the temperature
configuration will increase or decrease by 1ºC.
When keeping the TEMP buttons pressed, the
temperature configuration will increase or decrease
quickly.
• Press the FAN button to select the fan speed.
Each time the FAN button is pressed, the fan speed
will be modified as shown in Figure 7.10.
Fig. 7.10 Fan speed.
The operation in cooling mode is started when the
ambient temperature is greater than the configured one.
In dehumidifying mode and, when the ambient
temperature exceeds the configured one by 2ºC, the unit
will operate intermittently at LOW speed regardless of
the fan configuration, see Figure 7.11.
Fig. 7.11 Dehumidifying mode working diagram.
Legend
T1 Configured temperature
Note!
In dehumidifying mode, prolonged use of the
unit under conditions of considerable air
humidity can cause drops of water to fall on the
outlet grate.
7.5.4 Fan Mode (FAN)
In fan mode (FAN) the unit does not operate in the
following modes:
- cooling mode (COOL).
- heating mode (HEAT).
- automatic mode (AUTO).
In fan mode (FAN) the temperature configuration and
the SLEEP function are disabled.
Fig. 7.12 Fan selection mode.
Legend
1 MODE button
2 FAN mode indicator
3 FAN button
In order to activate the fan mode (FAN):
With the unit connected (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
AUTO
COOL
DRY
FAN
HEAT
Fig. 7.13 Operation modes.
Operating Instructions 7