9
Split wall-mounted User Manual
EN
Operating Instructions 7
7.5.4 Heating Mode (HEAT)
In heating mode, the air conditioning only allows heating.
In order to activate:
With the unit connected (see section 7.4):
• Press the MODE button.
• Select the heating operation mode (HEAT).
• Press the + - buttons to select the temperature setting.
• Press the FAN button to select the fan speed.
- Each time the FAN button is pressed, the fan speed
will be modified, increasing its power. There are
three different rates: Low, Med, High and AUTO
(indicator flashes).
- When the fan is configured in AUTO mode, the air
conditioning unit automatically sets the fan speed in
accordance with the actual ambient temperature.
7.6
Defrosting
When the outdoor air temperature is very low and the
humidity level is very high, the heat exchanger of the
outdoor unit will frost causing a negative impact on the
efficiency of the heating performance. In these cases,
the unit automatically triggers a defrosting function
which causes the heating operation to stop for 5 to 10
minutes:
- The fans of the Indoor and the Oudoor unit are
stopped.
- During defrost, the unit might generate some steam.
This is caused by fast defrosting and it does not
mean a performance failure.
- Once the unit completes the defrosting process, it
resumes the heating operation.
7.7
Setting the Direction of the Airflow
The direction of the airflow can be set in vertical and
horizontal directions.
Danger of injury and physical damage!
Avoid direct body contact with the powerful
airflows. Do not expose animals and plants
directly to the airflow. They could suffer
damage.
Warning!
Danger of breakdowns or malfunction.
Do not open the outlet louvres manually.
Note!
If the louvre does not work correctly, stop the
unit for one minute and restart it carrying out
the settings required with the remote controller.
Note!
In heating mode it is recommendable to direct
the louvres vertically.
Note!
In cooling mode it is recommendable to direct
the louvres horizontally.
7.7.1 Horizontal Airflow
Danger of injury and physical damage!
The horizontal airflow can only be adjusted
manually. Only do this with the unit switched
off.
• Stop the unit (see section 7.4).
• Direct the flaps manually to direct the airflow to the
left or right.
• Turn the unit back on, if you wish.
7.7.2 Vertical Airflow
• Press the VERTICAL SWING UP/DOWN to direct the
airflow upwards or downwards.
The vertical slat will be directed in accordance with
the positions allowed for each operation mode:
"NATURAL SWING", "ACTIVE SWING", "STOP".
