10
Split wall-mounted User Manual
7.8
TURBO
Press TURBO button during COOL or HEAT mode
operation. The air rate can be set to HIGH and continue
to operate for 15 minutes. Press TURBO button again
twice to release the TURBO mode operation.
7.9
Special Function Selection
7.9.1 SLEEP function
The COOL, DRY, HEAT, AUTO modes can be set during
the nighttime hours to reduce the operation sound when
sleeping, etc..
In order to activate:
With the unit connected (see section 7.4):
• Press the SLEEP button to reduce the air flow sound
from the indoor unit.
• Press the SLEEP button once more to release this
mode.
The SLEEP mode should only be used at night. If it is
used uring the day, the cooling/heating capacity will be
reduced since the room temperature is too high (COOL
mode).
The unit is operational for a maximum of 24 hours in
SLEEP mode.
In COOL mode
The ambient temperature gradually increases 2ºC in
relation to the configured one to ensure that the
temperature does not drop excessively during sleeping
hours.
In HEAT mode
The ambient temperature gradually decreases 5ºC in
relation to the configured one to ensure that the
temperature does not rise excessively during sleeping
hours.
- During the first operating hour of the SLEEP function,
the ambient temperature will drop 2ºC below the
configured temperature.
- Once an hour has elapsed, the temperature will drop
2ºC more.
- Once three hours have elapsed, the temperature will
rise 1ºC.
- The unit will be operational for a further three hours
before stopping.
7 Operating Instructions
