105
Navigating To the System Configuration Menu
Use the selection buttons (found just below the screen) for going backwards, forwards and
confirming selections. Use the rotary knob for scrolling through menus and for making adjustments
within selected settings.
Press the menu button
Scroll down and select ‘Installer level’
The default code is ‘000’
Select ‘System configuration’
For the relevant settings in the VRC700 controller, refer to page 21. Care must be taken going
through each setting diligently and adjust as necessary in accordance to system configuration and
property requirements. Only key settings are listed in this document, refer to the VRC700 installa
-
tion manual for further guidance.
Содержание UK aroTHERM plus
Страница 119: ...119...