background image

Manual - Solar hot water systems 0020009607_02

4

ENV 12977-2

Thermal solar systems and components; 
Factory made systems, 
Part 2: Testing methods

ISO 9459-1: 1993

Solar heating – Domestic water heating systems – Part 1:
Performance rating procedure using indoor test 
methods

ISO/TR 10217

Solar energy – Water heating systems – Guide to 
material selection with regard to internal corrosion

Collectors and collector assembly

EN 1991-2-4

Eurocode 1 – Basis of design and actions on structures -
Part 2–4: Actions on structures - Wind actions

Solar cylinder and cylinder installation

Pressure equipment directive 97/23/EC

Directive of the European Parliament and Council from 
29th May, 1997 for the approximation of the laws on 
pressure equipment of the Member States

EN 12977-3

Thermal solar systems and components;
Custom built systems,
Part 3: Performance characterisation of stores for solar
heating systems

EN 12897

Water supply - specification for indirectly heated 
unvented (closed) storage water heaters

EN 806-1

Specifications for installations inside buildings conveying
water for human consumption - Part 1: General

EN 1717

Protection against pollution of potable water 
installations and general requirements of devices to 
prevent pollution by backflow

EN 60335-2-21

Safety of household and similar electrical appliances; 
Part 2: Particular requirements for storage water 
heaters (hot water cylinders and hot water boilers) 
(IEC 335-2-21: 1989 and supplements 1; 1990 and 2; 1990, 
modified)

Lightning protection

ENV 61024-1

Protection of structures against lightning – Part 1: 
General principles (IEC 1024-1: 1990; modified)

BS 6651 Code of practice for protection of structures 
against lightning

2.2 

Regulations in Great Britain

2.2.1 Technical 

Guidance

The system must be installed in accordance with all rele-
vant and applicable national regulations, and must be in-
stalled to suit site conditions.
Observe all national regulations, including:
-  Working at Heights Regulations 2005
-  Health and Safety at Work Act 1974
-  Electricity at Work Regulations 1989
-  IEE Wiring Regulations BS 7671
- Lightning protection requirements
-  Equipotential bonding of electrical installations.

2.2.2 Related 

documents

The installation of the solar system must be in accor-
dance with the relevant requirements of Health and 
Safety Document No. 635 (The Electricity at Work Regu-
lations 1989), BS7671 (IEE Wiring Regulations) and the 
Water Supply (Water Fitting) Regulations 1999, or The 
Water Bylaws 2000 (Scotland). It should also be in ac-
cordance with the relevant requirements of the Local 
Authority, Building Regulations, The Building Regulations 
(Scotland), The Building Regulations (Northern Ireland) 
and the relevant recommendations of the following Bri-
tish Standards:

BS EN 806: Specification for installations inside buil-
dings conveying water for human consumption

BS 6700: Services supplying water for domestic use 
within buildings and their curtilages.

BS. 5449 Forced circulation hot water central heating 
systems for domestic premises. Note: only up to 45 kW.

BS. 6880 Low temperature hot water heating systems of 
output greater than 45 kW.
Part 1 Fundamental and design considerations.
Part 2 Selection of equipment.
Part 3 Installation, commissioning and maintenance.

BS 6114: Expansion vessels using an internal diaphragm 
for unvented hot water supply systems
BS. 4814 Specification for: Expansion vessels using an 
internal diaphragm, for sealed hot water heating sys-
tems.

Unvented hot water systems must comply with building 
regulation G section 3.

2.2.3  Regulations for the prevention of accidents

When carrying out works such as solar installation work 
it is necessary to do so in a safe and workman like man-
ner, taking due care of any aspects of the works that 
could result in injuries to person in or about the building 

2 Overview of standards, safety instructions 

Содержание Solar System and auroSTOR unvented solar...






































































Отзывы: