Vaillant multiMATIC VRC 700f/4, Руководство по эксплуатации

Страница: 15 / 34

5 Operating and display functions
14
Operating instructions multiMATIC 0020237615_01
5.2.3 Setting time programmes
5.2.3.1 Time programme settings after a voltage
loss
Note
If you de-energise the entire heating installa-
tion, all of the values that are set for the time
programmes will remain unchanged.
5.2.3.2 Showing time periods for one day
18:00 16:30
22:30
16 °C
21 °C
20:00
A
B
1
3
1
4
2 2
A Time
B Temperature
1 Day temp. heating
2 Set-back temp. heat.
3 Time period 1
4 Time period 2
You can use the Time programmes function to set the time
period.
If you have not set any time periods, the controller uses the
time periods set in the factory settings.
5.2.3.3 Setting time periods for days and blocks
For each day and block, you can set up to three time peri-
ods.
The time periods set for a day have priority over the time
periods set for a block.
Day temp. heating : 21 °C
Set-back temp. heat. : 16 °C
Period 1: 06:00-08:00
Period 1: 16:30-18:00
Period 1: 20:00-22:30
Within the time periods, the controller brings the room tem-
perature to the set
Day temp. heating .
Outside the time periods, the controller brings the room tem-
perature to the set
Set-back temp. heat. .
5.2.3.4 Setting time programmes quickly
If, for example, you require different time periods for just
one working day in the week, first set the times for the entire
block
Monday - Friday . Then set the different time period for
the working day.
5.2.3.5 Displaying and changing different times in
the block
Monday - Sunday
Period 1:
Period 2:
Period 3: !! : !! - !! : !!
!! : !! - !! : !!
!! : !! - !! : !!
Back Select
If you view a block on the display and have defined a differ-
ent period for a day in this block, the display indicates the
different time periods in the block with !!.
Individual dates vary from
the selected time programme
Mo-Su.
OK Back
If you press the right-hand selection button Select , a mes-
sage appears on the display which informs you about differ-
ent time periods. You do not need to adjust the times.
You can use the right-hand selection button OK to display
and change the set times for the block marked with !!.
5.2.3.6 Setting the Heating time programme
Menu
→
Time programmes
→
ZONE1
–
The time programmes are only effective in Automatic
mode (
→
Page 17). Within the time periods, the controller
brings the temperature of the connected rooms to the
set desired temperature
Day temp. heating . Outside of
these time periods, the control switches to the operating
mode that the competent person has set:
Eco or Set-
back temp. heat. . If the competent person has left the
default setting Eco , the control switches off the heating
function.
Setting the Heating operating mode. (
→
Page 17)