10
Operating instructions ecoTEC pro 0020209590_03
5.2
Calling up (Live monitor) status codes
▶
Press
and
at the same time.
Status codes
–
Overview (
◁
The current operating mode (status code) is shown
on the display.
6
Care and maintenance
6.1
Maintenance
An annual inspection of the product carried out by a compet-
ent person is a prerequisite for ensuring that the product is
permanently ready and safe for operation, reliable, and has a
long working life.
6.2
Caring for the product
▶
Clean the casing with a damp cloth and a little solvent-
free soap.
▶
Do not use sprays, scouring agents, detergents, solvents
or cleaning agents that contain chlorine.
6.3
Reading maintenance messages
If the
symbol is shown in the display, the product requires
maintenance work.
The product is not in fault mode but continues to operate.
▶
Consult a competent person about this.
▶
If the water pressure is flashing at the same time, simply
add more heating water.
6.4
Checking the condensate discharge pipe
and tundish
The condensate discharge pipe and tundish must always be
penetrable.
▶
Regularly check the condensate discharge pipe and tun-
dish for faults and, particularly, for blockages.
You must not be able to see or feel any obstructions in the
condensate discharge pipe and tundish.
▶
If you notice a fault, have it eliminated by a competent
person.
7
Decommissioning
7.1
Temporarily decommissioning the product
Caution.
Risk of material damage due to frost.
The frost protection and monitoring devices
are only active while the product is connected
to the power grid and switched on via the
on/off button, and when the gas stopcock is
open.
▶
Temporarily decommission the product
only if no frost is expected.
▶
Temporarily decommission the product only if no frost is
expected.
▶
Press the on/off button.
◁
The display goes out.
▶
When decommissioning the product for a prolonged
period (e.g. holiday), close the gas isolator cock and also,
for combination products, the cold water stop valve.
7.2
Permanently decommissioning the product
▶
Have a competent person permanently decommission
the product.
8
Recycling and disposal
▶
The competent person who installed your product is re-
sponsible for the disposal of the packaging.
If the product is labelled with this mark:
▶
In this case, do not dispose of the product with the
household waste.
▶
Instead, hand in the product to a collection centre for
waste electrical or electronic equipment.
If the product contains batteries that are labelled with
this mark, these batteries may contain substances that are
hazardous to human health and the environment.
▶
In this case, dispose of the batteries at a collection point
for batteries.
9
Guarantee and customer service
9.1
Guarantee
–
One year guarantee for ecoTEC pro appliances
Vaillant undertakes to rectify any manufacturing defect that
occurs within twelve months of the installation date.
–
Registering with us
Registration is simple. Just complete the Guarantee Regis-
tration Card and return to Vaillant within 30 days of installa-
tion. Your details will then be automatically registered within
the Vaillant scheme.
Note
No receipt will be issued.
–
Immediate help
If your Vaillant boiler develops a fault your first action should
be to contact your installer, as his professional assessment
is needed under the terms of our Guarantee. If you are un-
able to contact your installer, phone Vaillant Service Solu-
tions:
Telephone: 0330
100
3461
Содержание ecoTEC pro 30 H combi A VUW 306/5-3
Страница 1: ...en Operating instructions ecoTEC pro VUW 6 5 3 0020209590_03 29 07 2020 ...
Страница 13: ......
Страница 14: ......
Страница 15: ......