Vaillant ecoTEC exclusive 627, Руководство по эксплуатации

Страница: 13 / 16

Appendix
0020193967_01 ecoTEC exclusive Operating instructions
13
Fault Cause Measure
Product does not start
up:
–
No hot water
–
Heating remains cold
There is a fault in the flue gas route (fault message:
F.36 / F.37 ):
–
The symbols XXXXX are shown in the display.
–
The red LED is lit continuously.
Have your competent person rectify the fault.
Hot water generation
functioning correctly;
heating does not start
up. The external controller is not set correctly. Set the external controller correctly (
→
Controller
operating instructions).
C Status codes
–
Overview
Status codes that are not listed here can be viewed in the installation instructions.
Status code Meaning
Displays in heating mode
S.00 Heating: No heat demand
S.01 Heating mode: Fan start-up
S.02 Heating mode: Pump prerun
S.03 Heating mode: Ignition
S.04 Heating mode: Burner on
S.05 Fan and pump overrun
S.06 Heating mode: Fan overrun
S.07 Heating mode: Pump overrun
S.08 Heating, remaining anti-cycling time xx mins
S.09 Heating mode: Measuring programme
Domestic hot water mode (products with integrated domestic hot water generation)
S.10
Domestic hot water requirement via impeller sensor
S.11 DHW mode: Fan start-up
S.13
DHW mode: Ignition
S.14
DHW mode: Burner on
S.15 DHW mode: Pump/fan overrun
S.16
DHW mode: Fan overrun
S.17
DHW mode: Pump overrun
S.19 DHW mode: Measuring programme
Comfort mode, warm start or domestic hot water mode with actoSTOR or cylinder charging mode
S.20 Domestic hot water requirement
S.21 DHW mode: Fan start-up
S.22 DHW mode: Pump prerun
S.23 DHW mode: Ignition
S.24 DHW mode: Burner on
S.25 DHW mode: Pump/fan overrun
S.26 DHW mode: Fan overrun
S.27 DHW mode: Pump overrun
S.28 Domestic hot water burner anti-cycling time
S.29 DHW mode: Measuring programme
Other displays
S.30 Room thermostat (RT) is blocking heating mode
S.31 Summer mode active
S.34 Frost protection mode, frost protection
S.37 Waiting period: Deviation in fan speed
S.40 Comfort protection mode active
S.57 Waiting period: Measuring programme