4 On-roof fitting and installation
16
Installation manual auroTHERM classic 0020159946_01
2
1
▶
Install the plugs
(1)
at the bottom of the collector.
▶
Install the plugs
(2)
at the top of the collector.
▶
Secure the plugs with the clamps.
▶
Connect the collector flow and return to the system with
the connection tubes.
▶
Lay the connection pipe at a gradient.
Note
Observe the installation instructions for the
auroFLOW plus
system.
▶
Check the connections for tightness.
▶
Select the opening in the collector field that is nearest to
the flow connection.
1
2
▶
On the selected collector, use a screwdriver
(1)
to push
the rubber stopper for the temperature sensor through to
the marking.
▶
Do not remove the rubber stopper.
▶
Push the temperature sensor through the rubber stopper
until you can feel significant resistance
(2)
.
