1 Safety
4
Operating instructions atmoTEC exclusive, atmoTEC plus 0020214277_01
▶
Warn other occupants in the building by
yelling or banging on doors or walls.
▶
Leave the building immediately and ensure
that others do not enter the building.
▶
Alert the police and fire brigade as soon as
you are outside the building.
▶
Use a telephone outside the building to
inform the emergency service department
of the gas supply company.
1.5
Risk of death due to blocked or
leaking flue pipework
What to do if you smell flue gas in the prop-
erty:
▶
Open all accessible doors and windows
fully to provide ventilation.
▶
Switch off the product.
▶
Inform a competent person.
1.6
Risk of death due to explosive and
flammable materials
▶
Do not use the product in storage rooms
that contain explosive or flammable sub-
stances (such as petrol, paper or paint).
1.7
Risk of death due to changes to the
product or the product environment
▶
Never remove, bridge or block the safety
devices.
▶
Do not tamper with any of the safety
devices.
▶
Do not damage or remove any tamper-
proof seals on components.
▶
Do not make any changes:
–
The product itself
–
to the gas, supply air, water and electri-
city supply lines
–
to the entire flue system
–
to the expansion relief valve
–
to the drain pipework
–
to constructional conditions that may
affect the operational reliability of the
product
1.8
Risk of poisoning caused by
insufficient combustion air supply
Conditions
: Open-flued operation
▶
Ensure that there is a sufficient combus-
tion air supply.
1.9
Risk of being scalded by hot drinking
water
There is a risk of scalding at the hot water
draw-off points if the hot water temperatures
are greater than 60 °C. Young children and
elderly persons are particularly at risk, even
at lower temperatures.
▶
Select the temperature so that nobody is at
risk.
1.10 Risk of injury and material damage
due to maintenance and repairs
carried out incorrectly or not carried
out at all
▶
Never attempt to carry out maintenance
work or repairs on your product yourself.
▶
Faults and damage should be immediately
rectified by a competent person.
▶
Adhere to the maintenance intervals spe-
cified.
1.11 Risk of corrosion damage due to
unsuitable combustion and room air
Sprays, solvents, chlorinated cleaning
agents, paint, adhesives, ammonia com-
pounds, dust or similar substances may lead
to corrosion on the product and in the air/flue
pipe.
▶
Ensure that the combustion air supply is
always free of fluorine, chlorine, sulphur,
dust, etc.
▶
Ensure that no chemical substances are
stored at the installation site.
