Vaillant 0020236294, Руководство по эксплуатации

Страница: 6 / 28

4 Operation
6
Operating instructions 0020262548_00
4.1.4 Setting level
ZONE1
Set-back temp. heat.
Day temp. cooling
Day temp. heating
Back Change
20,0°C
26,0°C
15,0°C
2 2
3 1
4
1 Set values
2 Current function of the
selection button
3 Functions on the setting
level
4 Current selection level
You can read or change the set values in the setting level.
4.1.5 Soft key function for the selection buttons
Both selection buttons have a soft key function, i.e. different
functions may be assigned to the selection buttons. If, for ex-
ample, you press the left-hand selection button, the current
function switches from
Menu to Back .
4.2 Basic display
Auto 5,0°C
°C
19,5
15:34
Desired heating temp. 20,0°C
Menu Op. mode
1
4
2
3
5 5
7
6
8
1 Symbol for outdoor
temperature
2 Outdoor temperature
3 Time
4 Room temperature (for
wall-mounting only)
5 Current function of the
selection button
6 Information field
7 Symbol for Auto operat-
ing mode
8 Mode for the current
operating mode
The basic display appears:
–
If you press the selection button several times.
–
If the system control is in a selection level or setting
level and you do not operate the control for more than 5
minutes.
4.2.1 Preferred zone in the basic display
If your heating installation has several zones, the competent
person sets the zone whose values are to appear in the ba-
sic display.
4.2.2 Preferred operating mode in the basic
display
If your heating installation is designed for two of the three
operating modes (heating, cooling or ventilating), you can
switch the basic display to the required operating mode.
Setting the preferred display (
→
Page 14)
4.2.3 Information in the basic display
The basic display shows the most important current settings
and values for the heating installation.
Various information may appear in the basic display. This
depends on which operating mode you give preference to in
the basic display and the mode that this operating mode is
in.
4.2.3.1 Basic display for the Heating operating
mode
Mode Time
periods Symbol Information field
Auto On
Desired heating temp.
appears:
–
The system control
maintains the temper-
ature at the desired
level.
Empty line appears:
–
The system control
does not request any
heating energy.
Off
Day
Set-back
off Empty line
4.2.3.2 Basic display for the Cooling operating
mode
Mode Time
periods Symbol Information field
Auto On Desired cooling temp.
Off Empty line
Day Desired cooling temp.
off Empty line
4.2.3.3 Basic display for the Ventilation operating
mode
Mode Time
periods Symbol Information field
Auto On Max. vent. stage
Off Max. vent. stage
Day Ventilation stage
Set-back Ventilation stage
4.2.3.4 Basic display for the Manual cooling
advanced function
Mode Time periods Information field
Activated On Desired cooling temp.
Off Empty line