Operation 4
0020172515_05 aroTHERM Operating instructions
13
Setting level
Unit
Contact details
Serial number
Device specific number
Operating hrs. Total
Operating hrs. Heating
Operating hrs. Cooling
Menu
→
Basic settings
→
Language
15
Display contrast
Menu
→
Resets
→
No sub-items
Available
4.5 Live Monitor (status codes)
Menu
→
Live Monitor
You can use the Live Monitor to display
the current status of the product.
4.6 Displaying the building circuit
pressure
Menu
→
Live Monitor
→
Building circuit
pressure
–
You can display the current filling pres-
sure of the heating installation in digital
form.
4.7 Reading the operating
statistics
Menu
→
Information
→
Heating op.
hours
Menu
→
Information
→
Cooling op.
hours
Menu
→
Information
→
Total operating
hours
In each case, you can display the operat-
ing hours for the heating mode, the cooling
mode and the overall operation.
4.8 Displaying contact data
Menu
→
Information
→
Contact details
If your competent person has entered their
telephone number during the installation,
you can read this data under
Contact
data
.
4.9 Displaying the serial number
and article number
Menu
→
Information
→
Serial number
–
The product's serial number is dis-
played.
–
The article number is found in the
second line of the serial number.
4.10 Setting the display contrast
Menu
→
Basic setting
→
Display con-
trast
–
You can use this function to adjust the
display contrast to suit your needs.
4.11 Setting the language
If you want to set another language:
▶
Press
and hold
and
at the same
time
.
▶
Also press the fault clearance key for a
short time.
▶
Press and hold
and
until the
display shows the language setting.
▶
Select the required language by press-
ing
or
.
▶
Press (OK) to confirm your selection.
▶
Once you have set the correct lan-
guage, press (OK) again to confirm this.
4.12 Switching the product on/off
▶
Use a partition with a contact opening
of at least 3 mm (e.g. fuses or power
switches) to de-energise the product.
